Filter
Top Products
English - 15
Connecting Cable TV
You can connect different cable systems to your TV, including cable without a cable box,
and cable with a cable box that descrambles some or all channels.
Cable without a Cable Box
If you want to connect cable, and you do not need to use a cable box:
Plug the incoming cable
into the ANT 1 IN or ANT
2 IN terminal on the rear
panel.
2
Plug the combiner into
the ANT 1 IN or ANT 2 IN
terminal on the rear
panel.
INSTALLATION
Antennas with 75-ohm Round Leads
Plug the antenna lead
into the ANT 1 IN or ANT
2 IN terminal on the rear
panel.
Separate VHF and UHF Antennas
If you have two separate antennas for your TV (one VHF and one UHF), you must combine
the two antenna signals before connecting the antennas to the TV. This procedure requires
an optional combiner-adaptor (available at most electronics shops).
1
Connect both antenna
leads to the combiner.
AA68-03263C-00_eng_Chapter2 3/11/05 5:39 PM Page 15