Filter
Top Products
Safety Precautions
This STB has been manufactured to meet international safety standards.
Please read the following safety precautions carefully before you handle the STB.
MAIN SUPPLY Use only 90-250V AC 50/60Hz.
CABLE Use standard certified cables to prevent any malfunction of
the STB.
LOCATION Locate the STB indoor. Locate STB away from potential
hazards such as houseplants, lightning, raining and direct
sunlight.
CLEANING 1. Always disconnect the STB power cord from the wall socket
before cleaning it.
2. Use a light damp cloth(no solvents)to dust the STB.
OVERLOADING Do not overload wall outlets, extension cords or adapters.
These can cause fire or electrical shock.
VENTILATION 1. NEVER block ventilation slots of STB.
2. NEVER stand the STB on soft furnishings or carpets.
3. Ensure that a free airflow is maintained around the STB.
4. Do not use or store the STB where it is exposed to direct
sunlight or near a heater.
5. NEVER stack other electronic equipment on top of the STB.
LIQUIDS Keep liquids away from the STB.
SMALL OBJECTS Coins or other small objects must be kept away from the STB.
They can fall through ventilation slots of the STB and cause
serious damage.
ATTACHMENTS Do not use any attachments that are not recommended.
These may cause hazards or damage the equipment.
CONNECTION TO Before connecting or disconnecting the cable from the satellite
THE SATELLITE dish to the STB, disconnect the STB from the mains supply.
DISH LNB FAILURE TO DO SO CAN DAMAGE THE LNB.
EARTHING The LNB cable MUST BE EARTHED to the system earth for the
satellite dish. The earthing system must comply with SANBS061.
General Information
user's 4/9/01 3:24 PM Page 2