Filter
Top Products
26_ connecting with other device
connecting with other device
RJ-45 Cable (Length: 18.3m, 60ft)
This cable is specific to UTP connection, which is not compliant with the LAN cable. You can use the UTP
direct cable (all of 8 pins are used) to extend the length to a max of 200m. (based on UTP CAT 5e)
CVBS+
N.C
CVBS-
N.C
GND 12V
N.C
N.C
<Cable pin information provided>
Name
1 CVBS+
2 CVBS-
3 AUDIO
4 GND
5 12V
6 N.C
7 N.C
8 N.C
Camera Cable
CONNECTING THE CAMERA (SEB-1020R)
Equipped with the IR LED and the illumination sensor, enables you to monitor at night as well as in daytime.
The camera is suitable for both internal and external use.
Please make sure not to fully expose the camera to rain. The camera must be installed under a shelter to avoid exposure to excessive rain
or moisture.
Name Description
a
IR LED These infrared LED’s are controlled by the illumination sensor.
b
Lens Focal length of 3.6mm enables you to cover relatively longer range of monitoring.
c
Illumination Sensor Detects incoming light to control the IR LED.
d
Camera Fitting
Groove
Groove that is used to fit the camera bracket.
There are two grooves; one on the top and one on the bottom.
e
BNC Cable BNC terminal for video signal output.
f
Power Cable Used to plug the power cable.
a
b
c
d
e f