Filter
Top Products
18_ installation
installation
Install a HDD (x1) on the lower bracket and fi x it with
screws.
Install HDDs (x3) on the upper bracket and fi x them
with screws.
When the installation of additional HDDs is done,
insert the lower and upper brackets into the DVR
and fi x them with the provided screws.
When the installation of additional HDDs is done,
connect the power cable and connect the HDD
data cables (SATA Cable) to connectors ~ on
the main board.
Note that the number of a HDD data calbe is nothing to do
with operation of the HDD. Just make arrangements of the
connectors considering the length of each connector.
Check if the connectors are properly connected and
there is no problem with wiring, and close the cover
and fi x it with screws.
3.
4.
5.
6.
`
7.
Cover
Upper Bracket
Lower
Bracket
Lower Bracket
Upper Bracket
Add
Installed by default
Add
Add
Add
with operation of the HDD. Just make arrangements of the
connectors considering the length of each connector.
00769B_SHR-8162_ENG-NEW.indb 18 2008-12-04 오전 10:14:24