Filter
Top Products
English _45
USING THE DVR
Remote Devices
You can set the RS-485 communication for use of PTZ Camera and system keyboard with the DVR.
Using the mouse may help easy setup.
Use the up/down buttons (
▲▼
) in <Device> window to
move to <Remote Device>, and press [ENTER] button.
Use direction buttons (
▲▼_ +
) to move to the desired
item, and press [ENTER] button.
Set the values of each communication setup of the remote
device.
Baud rate : Baud rate settings of the DVR, PTZ camera and
system keyboard should be matched for proper operations.
Make sure to match IDs of the DVR, System Keyboard
and Remote Control, and press <OK>.
For changing the remote control’s ID, refer to “Changing the Remote Control ID”. (Page 13)
POS Devices
You can set properties of POS devices connected to the DVR.
A POS device connection requires channel, preset, and port/Ethernet settings.
Using the mouse may help easy setup.
Use the up/down buttons (
▲▼
) in <Device> window to
move to <POS Device>, and press [ENTER] button.
Use direction buttons (
▲▼_ +
) to move to a desired
item, and set the value.
POS USE : When selected <POS USE>, DVR and POS will
be connected.
If you change settings for the device and press <OK> while
the <POS USE> is not checked, the changes for POS device
will not be saved.
POS Device Setup : Sets the communication setups for the
POS device and DVR.
It is independent to the Remote Device setup.
3.
4.
5.
~
6.
M
`
3.
4.
~
J
`
~
`
System Keyboard OFF ID 00
Remote Control ON ID 32
Baudrate Parity Data Stop Bit Transfer type
9600
None
8
1
Half Duplex
Remote Device
OK Cancel
POS USE
POS CH Preset
Port/Ethernet
1 None No preset None
2 None No preset None
3 None No preset None
4 None No preset None
5 None No preset None
6 None No preset None
7 None No preset None
8 None No preset None
POS Device
OK Cancel
Previous/Next Page
POS Device Setup
POS USE
POS CH Preset
Port/Ethernet
1 None No preset None
2 None No preset None
3 None No preset None
4 None No preset None
5 None No preset None
6 None No preset None
7 None No preset None
8 None No preset None
POS Device
OK Cancel
Previous/Next Page
POS Device Setup
POS Device Setup
OK Cancel
Baudrate Parity Data Stop bit Transfer type
9600
None
8
1
Half Duplex
00769B_SHR-8162_ENG-NEW.indb 45 2008-12-04 오전 10:15:28