Filter
Top Products
➢
English - 26
Customizing the Picture Settings
Contrast 80
Mode : Standard
Size : 16:9
Digital NR : On
DNIe Demo : Off
My Colour Control
Film Mode : Off
PIP
Picture
TV
Move Enter Return
Mode : Custom
Contrast 80
Brightness 50
Sharpness 50
Colour 50
Tint G 50 R 50
Colour Tone : Cool 1
Reset
Mode
TV
Move Enter Return
Mode : Custom
Contrast 80
Brightness 50
Sharpness 50
Colour 50
Tint G 50 R 50
Colour Tone : Cool 1
Reset
Mode
TV
Move Enter Return
Cool 2
Cool 1
Normal
Warm 1
Warm 2
Mode : Custom
Contrast 80
Brightness 50
Sharpness 50
Colour 50
Tint G 50 R 50
Colour Tone : Cool 1
Reset
Mode
TV
Move Enter Return
Your television has several setting options that allow you to control
the picture quality.
1 Press the MENU ()button.
Result
: The main menu is displayed.
2 Press the … or † button to select Picture.
Result
:
The
Picture menu is displayed.
3 Press the ENTER () button.
Result
:
The
Mode is selected.
4 Press the ENTER () button again.
Result
:
The
Mode menu is displayed.
5 Press the ENTER () button.
Result
: The following
options
are available.
Dynamic - Standard - Movie - Custom
6 Select the required option by pressing the … or † button.
7 Press the ENTER () button.
8 Select the required option by pressing the … or † button.
Result
: The following
options
are available.
◆ Contrast - Brightness - Sharpness - Colour -
Tint (NTSC only)
◆ Contrast - Brightness : PC mode.
9 Press the ENTER () button.
Result
: The horizontal bar is displayed.
Press the œ or √ button until you reach the optimal
setting.
➢
◆ Press the … or † button to select other option(s).
◆ The settings values may vary depending on the input
source. (ex. RF, Video, Component, PC, or HDMI.)
10 Press the MENU () button to return to Mode menu.
Press the
… or † button to select Colour Tone.
Press the
ENTER () button.
11 Select the required option by pressing the … or † button.
Result
: The following
options
are available.
Cool 2 - Cool 1 - Normal - Warm 1 - Warm 2
12 Press the ENTER () button.
13 To return the factory defaults, select Reset by pressing the
… or † button. Press the ENTER () button.
Result
: The previously adjusted settings will be reset to the
factory defaults.
➢
The reset function is set for each mode (Dynamic,
Standard, Movie, or Custom).
➢
The reset function is also set for each Colour Tone (Cool 2,
Cool 1, Normal, Warm 1, or Warm 2).
14 Press the EXIT button to exit.
BP68-00564A-00Eng 11/24/05 10:57 AM Page 26