Filter
Top Products
14
ENG
When the television is initially powered on, three basic customer
settings proceed automatically and subsequently: setting the
language, channel and clock.
1 If the television is in Standby mode, press the POWER ( ) button
on the remote control.
Result
: The message Plug & Play is displayed. It flickers for
a little while and then
Language menu is automatically
displayed.
2 Select the appropriate language by pressing the ▼ or ▲ button.
Press the
MENU button to enter the language.
Result
: The message Ant. Input Check is displayed.
➣
If any language is not selected on the Language menu, the
Language menu will disappear about 30 seconds later.
3 Make sure that the antenna is connected to the TV.
Press the
➛ or ❿☎button.
Result
: The
Auto store menu is displayed with Country is
selected.
4 Select your country by pressing the ➛ or ❿ button.
To search the channels, select
Search by pressing the ▼ or ▲
button, and then press the ➛ or ❿ button.
Press the
MENU button to stop the search.
Result
: The
Time menu is displayed with Clock is selected.
➣
Refer to “Storing Channels Automatically” on page 18.
5 Press the ➛ or ❿ button to move to the hour or minute.
Set the hour or minute by pressing the
▼ or ▲ button.
➣
Refer to “Setting and Displaying the Current Time” on page
34.
6 When you have finished, press the MENU button.
Result
: The message Enjoy your watching is displayed,
and then the channel which has been stored will be
activated.
Plug and Play Feature
Auto store
Country : Others
Search :
-
/+
P 1 C-- -----
106 MHz 7
%
Time
Clock : -- : --
Timer : Off
Plug & Play
Enjoy your watching.
Ant. Input Check
Language
English
Čeština
Deutsch Srpski
Français Hrvatski
Nederland Romana
Español Magyar
Italiano Polski
Sverige
усский
Português ЬА
EEllllhhuuiikkaavv
Türkçe