Filter
Top Products
47
Programming the Remote Control for Other Components
ENG
This TV’s remote control can operate almost any VCR, Cable box,
or DVD, in addition to controlling the TV.
➣
The remote control might not be compatible with the TV
manufactured by another company.
1 Turn off your VCR, Cable box, or DVD.
2 Press the appropriate button among the component selection
buttons to activate another component (
TV, VCR, Cable, DVD).
Example
: If you want to program the remote control to operate
your VCR, press the VCR button on the remote
control.
3 Press the SET button.
4 Use the numeric buttons to enter the code by manufacturer. Each
code must be three digits long.
Example
: To enter the code “6”, press 0, 0, and 6.
To enter the code “76”, press 0, 7, and 6.
➣
See the remote control code tables to find the appropriate
code for your particular component. If more than one code
is listed, try each one separately until you find the one that
works.
5 Press the Power ( ) button on the remote control. The
component you select should turn on. If it turns on, your remote
control is now set correctly.
➣
If it does not turn on, repeat steps above, but try one of the
other codes listed for the brand of particular yours. If no
other codes are listed, try each code, “000” through “089”
for VCR/DVD and “000” through “077” for Cable box.
6 Once your remote control is set up, press the SET button any time
you want to use the remote to operate your Cable box, VCR or
DVD.
➣
◆ When your remote control is in the VCR, Cable, or DVD
mode, the volume buttons still control your TV’s volume.
◆ When your remote control is in the TV or Cable mode,
the VCR or DVD control buttons (PLAY, PAUSE, etc.)
still operate your VCR or DVD.
SET
DVDCable
VCRTV
Power