Filter
Top Products
14
ENG
If the color appears spread out or “smeared” on the screen, the
convergence probably needs alignment. Be sure to use the remote
control for the convergence adjustments. (The Convergence
Adjustment can not be made by using the control buttons on the
front panel.)
1 Press the MENU button.
Result:
The main menu is displayed.
2 Move the joystick up or down until the FUNCTION is selected and
press the joystick ( ) button.
Result:
The FUNCTION menu is displayed.
3 Move the joystick up or down until the CONVERGENCE is selected
and press the joystick ( ) button.
Result:
The CONVERGENCE menu is displayed with the RED
selected.
4 Press the joystick ( ) button again.
Result:
A crosshair pattern will appear on the screen.
5 Adjust convergence by using your remote control.
➣
If a horizontal red line is visible, use P and P buttons
to move the line so that it is superimposed on the horizontal
center-line (i.e., make a signal horizontal line that is as white
as possible).
➣
If a vertical red line is visible, use
-
and + buttons to
move the line so that it is superimposed on the vertical
center-line (i.e., make a signal vertical line that is as white as
possible).
6 For blue adjustment, do the same as the above.
7 After the blue convergence is correctly adjusted, press the
MENU button repeatedly to return to normal viewing.
➣
Since the center convergence adjustments can not be
done after completing the side convergence adjustments,
do the center convergence adjustments first.
Adjusting Basic Convergence
SELECT ENTER EXIT
FUNCTION
LANGUAGE : ENGLISH
TIME
√√
CONVERGENCE
√√
BLUE SCREEN : ON
SELECT ENTER EXIT
UP/DOWN L/R EXIT
POSITION 0:R/B
RED
PLEASE USE REMOTE CONTROL
CONVERGENCE
MANUAL CONVERGENCE
RED
√√
BLUE
√√
PERFECT FOCUS
√√