Filter
Top Products
29
ENG
Setting the Dolby ProLogic
You can enjoy Dolby prologic surround effect fully with only
surround speakers are connected to TV.
This allows various modes for the main, center and rear speakers to
be selected.
Surround Mode Input Signal Speakers
Main Centre Rear
NORMAL Stereo ✔✔✔
Mono ✔
PHANTOM Stereo ✔✔
Mono
✔
WIDE Stereo ✔✔✔
Mono ✔
OFF Stereo ✔
Mono ✔
➢
✔ ; Sound
1 Press the MENU button.
Result:
The main menu is displayed.
2 Move the joystick up or down until the SOUND is selected and press
the joystick ( ) button.
Result:
The SOUND menu is displayed.
3 Move the joystick up or down until the DOLBY PRO LOGIC is
selected and press the joystick ( ) button.
Result:
The
DOLBY PRO LOGIC menu is displayed with the
MODE selected.
4 Select the required mode (OFF, NORMAL, PHANTOM, WIDE) by
moving the joystick left or right.
The following Dolby settings can be adjusted to suit your personal
preferences.
◆ Volume of the centre and rear speakers
◆ Prologic delay time for the rear speakers (between
15 and 30 ms)
◆ Activation/deactivation of the test tone to simulate the
volume on each speaker
5 To... Move the joystick...
Change a setting up or down.
Change the option left or right.
6 When you are satisfied with the settings, press the TV button, or
press the MENU button repeatedly to return to normal viewing.
SELECT ADJUST EXIT
DOLBY PRO LOGIC
MODE
œœ
NORMAL
√√
CENTER : 0
REAR : 0
DELAY : 20 ms
TEST TONE : OFF
CONNECT SPEAKER
SELECT ADJUST EXIT
DOLBY PRO LOGIC
MODE
œœ
OFF
√√
SELECT ADJUST EXIT
DOLBY PRO LOGIC
MODE
œœ
NORMAL
√√
CENTER : 0
REAR : 0
DELAY : 20 ms
TEST TONE : OFF
CONNECT SPEAKER
SELECT ENTER EXIT
SOUND
MODE
œœ
CUSTOM
√√
EQUALIZER
√√
AUTO VOLUME : OFF
MELODY : ON
DOLBY PRO LOGIC
√√
R L
Rear of TV
Option