Filter
Top Products
23
ENG
Adjusting the Picture Settings
Your television has several settings which allow you to control
picture quality:
◆ Color tone, Contrast, Brightness, Color,
Sharpness, Tint
(NTSC only)
1 Press the MENU button.
2 Press the joystick ( ) button to enter the PICTURE menu.
3 Move the joystick up or down until the ADJUST is selected and
press the joystick ( ) button
Result:
The
ADJUST menu is displayed with the current option.
➣
When the MODE is set to CUSTOM, the ADJUST menu is
displayed.
4 To adjust the... Move the joystick...
◆ COLOR TONE ◆ left or rightuntil the required option is
(NORMAL, WARM1, WARM2, COOL1,
COOL2) displayed.
◆ CONTRAST ◆ left or right.
◆ BRIGHTNESS Result:
The horizontal bar is displayed.
◆ SHARPNESS
◆ COLOR
◆ TINT (NTSC only)
5 When you are satisfied with the settings, press the TV button, or
press the MENU button repeatedly to return to normal viewing.
➣
The television has an “automatic degaussing” system that is
activated if magnetic interference is present. To degauss the
television screen, switch power off by pressing the “
I ”
(ON/OFF) button on the front panel (refer to “Automatic
Degaussing To Remove Colour Patches” on page 45).
➣
If you make any changes to the ADJUST settings, the picture
standard is automatically switched to
CUSTOM.
SELECT ENTER EXIT
PICTURE
MODE
œœ
CUSTOM
√√
ADJUST
√√
DIGITAL NR : ON
NATURAL SCAN : ON
LNA : OFF
SELECT ADJUST EXIT
ADJUST
COLOR TONE : NORMAL
CONTRAST : 100
BRIGHTNESS : 50
SHARPNESS : 75
COLOR : 60
TINT : 50G 50R
SELECT ADJUST EXIT
ADJUST
COLOR TONE : NORMAL
CONTRAST : 100
BRIGHTNESS : 50
SHARPNESS : 75
COLOR : 60
TINT : 50G 50R
CONTRAST 100