Filter
Top Products
GB
31
GB
30
Using the Timer Programming Feature
The Timer Programming feature allows you to preset the DVD-VCR
to record a programme up to one month before that programme is
to be broadcast. Up to six programmes can be preset.
☛ Before presetting a recording, check that the date and
time are correct.
1 Insert the cassette and press TIMER on the remote control.
Result
: The timer programme is displayed.
2 Press
❿!
to select the input source.
3 Select the required station by pressing the
"
,
❷
buttons.
4 Press
❿
to select the recording day.
5 Select the required day by pressing the
"
or
❷
buttons.
6 Press
❿
to select the recording start time.
7 Select the required hour value by pressing the
"
or
❷
buttons.
8 Press
❿
to select the minutes.
9 Select the required minute value by pressing the
"
or
❷
buttons.
10 Press
❿
to select the recording stop time.
11 Select the required recording stop time by pressing the
"
or
❷
buttons, following the same procedure as when selecting the
recording start time.
12 Press
❿
to select the recording speed.
13 Press the
"
or
❷
buttons to select the SP (Standard Play), LP
(Long Play), AUTO (Auto Tape Speed Select) recording speeds.
14 When you have finished, press the RETURN button.
15 Press the STANDBY/ON button to activate the timer.
Result
: Before starting recording, the DVD-VCR compares the
timer duration with the remaining time on the cassette.
➢ Auto Tape Speed Select. The DVD-VCR’s “Auto Tape
Speed Select” function compares the duration of the timer
recording to the actual recording time remaining on the
tape loaded. If there is insufficient tape to complete a
timer recording in AUTO mode, the DVD-VCR
automatically switches to LP mode to record the whole
programme.
2
3
4
5
6
SHUTTLE
STANDBY/ON OPEN/CLOSE
AUDIO
MODE/
REPEAT
TV/VCR
CLOCK/
COUNTER
15
1/JAN TUE 12:09
PR DAY START
→
STOP
1 SA 9 12:00
→
12:50SP
-- ---- --:--
→
--:----
-- ---- --:--
→
--:----
-- ---- --:--
→
--:----
-- ---- --:--
→
--:----
-- ---- --:--
→
--:----
"❷
➛❿
SET:
❿
RETURN DELETE:CLEAR
Recording a Programme with Automatic Stop
This function enables you to record up to nine hours (LP) of
programmes.
Your DVD-VCR stops automatically after the requested length of
time.
1 Switch on the television.
2 To monitor the programme being recorded, select the television
channel reserved for use with your DVD-VCR (or the AV input if
used).
3 Insert the cassette on which the programme is to be recorded,
with the window visible and the safety tab intact or the opening
covered with adhesive tape.
Result
: The DVD-VCR is switched on automatically.
4 Select:
◆
The station to be recorded using the
PROG (
"
or
❷
)
buttons
or
◆ The LINE source using the INPUT SEL. button for a satellite
tuner or external video source
Result: The channel number is displayed and the programme
can be seen on the television.
5 Select the recording speed by pressing the SPEED button as
many times as required (see page 28).
6 Hold the REC button (
●
) down for a while to start recording.
Result
: The record indicator appears on the television screen
and DVD-VCR display. An index is recorded on the
tape (see page 36).
7 Press the REC button (
●
) several times to increase the recording
time in:
◆ 30-minute intervals up to four hours
◆ 1-hour intervals up to nine hours (LP)
Result
: The length is displayed on the television displays. The
selected programme is recorded for the length of time
requested. At the end of that time, the DVD-VCR stops
recording automatically.
8 If you wish to cancel the recording before the end, press
STANDBY/ON.
☛ If the end of the tape is reached while recording:
◆ The recording stops
STANDBY/ON
SELECT COPY
PROG REC
EJECT
OPEN/CLOSE
L
AUDIO
R
VIDEO
LINE IN 2
3
DVD VCR INPUT SEL.
VIEW
TRK PROG
DISPLAY
REC
DISC MENU
F.ADV/STEP
DIGEST
4
4
REC
DISC MENU
SETUP
/ENTER
RETURN TITLE SUBTITLE MARK
A.DUB SPEED TIMER INDEX
6
5
VCRVCR
LENGTH 2:30
SET LENGTH :
PRESS REC
●