Filter
Top Products
SVR-1650E/1640A/950EUser Manual
69
5
AUTO
If AUTO button is pressed, each channel and 4 DIVISION screen, 9 DIVISION screen and 16 DIVISION
screen(SVR-950E: 4 DIVISION screen, 9 DIVISION screen) are automatically converted and displayed in
time interval which was setup in [Screen Setup]–[SEQUENCING] in the conversion menu.
In automatic screen conversion state, input from other buttons is not
recognized. Push the AUTO button and cancel the Automatic screen conversion
function before using other function buttons.
If an Event is generated and [EVENT]–[SWITCH TO EVENT SCREEN] is [ON] for
[Event Setup], Automatic screen conversion function is halted for [EVENT
DISPLAY MAX TIME] before resuming operation.
D-ZOOM
If D-ZOOM button is clicked, zoom function for the installed camera can be used.
D-ZOOM is scalable by 8 times.
PIP
If PIP button is clicked, screen within a screen can be viewed in SINGLE mode. PIP function can be setup
for every 16 channels(SVR-950E: 9 channels).
PTZ
If PTZ button is clicked, detailed PRESET setup and PAN, TILT, ZOOM function for the dome camera
that has already been installed can be used.