Install Manual
5
Dismantling and cleaning
9 Do not dismantle, repair or modify the product deliberately. Doing so may cause a
damage, an electric shock or an injury.
9 Do not use water, paint thinner or organic solvent for cleaning the product exterior.
Doing so may cause a malfunction or an electric shock. Use a dry cloth to clean the
exterior.
During installation
9 To get adequate ventilation, install the product with at least 15cm of space between
the cooling ventilation opening and a wall.
9 To prevent falling, install the product in a flat area . Dropping the product may
cause an injury or a malfunction.
9 Avoid areas exposed to sun light or heat since they may cause deformation or a
malfunction.
9 If a camera is installed while the DVR is recording, image in another channel may
be disrupted. Start the storage after installing the camera is recommended.
During use
9 Make sure the product is not exposed to shocks or shaking when using the product
or during moving.
9 Do not move the product while it is in operation, and apply strong shocks to the
product or throw the product.
9 If hard disk drives other than those recommended are used additionally, abnormal
operation may occur. Inquire at the point of purchase of the product before
installing such a hard disk drive.
9 Product warranty will not cover deliberate additional use of such hard disk drives.
9 This product is a supplementary rather than primary means for preventing fire and
theft. Our company is not responsible for incidence of incident or damage that may
occur.
Caution
Provides information users need to know in order to prevent minor
injury or product damage.