Filter
Top Products
User Manual
8
Do not use water, paint thinner or organic solvent for cleaning the product exterior. Doing so
may cause a malfunction or an electric shock. Use a dry cloth to clean the exterior.
During installation
For adequate ventilation, install the product with at least 15cm of space between the cooler
and the wall surface.
To prevent falling, install the product on a flat area . Dropping the product may cause an injury
or a malfunction.
Avoid areas exposed to direct exposure to sun light or excessive heat since they may cause
deformation or a malfunction.
If a camera is installed while the DVR is being recorded, image in another channel may be
disrupted. Starting the storage after the camera has been installed is recommended.
During use
Make sure the product is not exposed to concussions or shaking during usage or movement.
Do not move, throw or expose to excessive physical concussion during usage.
Installing additional unapproved hard disk drives may result in abnormal operation. Inquire at
the agency of purchase before installing additional hard disk drives.
Product warranty will not cover malfunctions due to additional installation of unapproved hard
disk drives.
This product is a supplementary rather than primary means for preventing fire and theft. Our
company is not responsible for accidents or damage that may occur.
Samsung Techwin recommends the installation of a UPS (Uninterrupted Power
Supply) with all its recording products.
Samsung Techwin cares for the environment at all product
manufacturing stages, and is taking a number of steps to provide
customers with more environmentally friendly products. The Eco
mark represents Samsung Techwin’s will to create environmentally
friendly products, and indicates that the product satisfies the EU
RoHS Directive.
FCC Compliance Statement
NOTE : This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
Caution
Provides information users need to know in order to prevent minor
injury or product damage.