Filter
Top Products
Install Manual
35
Remote Control ID supports a maximum of 16 IDs.
For unused remote controllers, set Remote Control ID to Off.
3.2.2.2 Selecting IDs
All DVR unit features can be controlled with the remote controller; 16 units can be controlled
with a single remote controller. Unit IDs should be set.
1) Check the remote controller ID in DVR Menu.
2) Press the ID button on the remote controller.
3) Press the number button on the remote controller.
If the remote controller ID and the DVR ID are the same, the DVR buzzer beeps
3.2.2.3 Usable range of Remote Controller
3.2.2.4 Inserting and changing batteries in the Remote Controller
The remote controller takes AAA sized batteries.
1. Open the battery cover on
the back.
2. Check the positive(+) and
negative(-) battery poles
and insert or replace the
batteries.
3. Close the battery cover.