Filter
Top Products
User Manual
37
Chapter 4. Monitoring
When power is supplied to the DVR, images from all channels connected via analog are
displayed on the screen in monitor mode. This chapter describes all DVR features in monitor
mode.
4.1 Default Display
-
The DVR automatically powers on when
the power cord is plugged in.
-
While the DVR is booting up, all LEDs
blink on and off in sequence.
- Once it finishes booting up, the default 16
channel split-screen is displayed (9
channel split-screen for SVR-960C/945, 4
channel split-screen for SVR-480).
※ If a password for the unit has been set, the
password input dialog is displayed.
4.2 Single Display Full Screen
-
Press a channel button or left-click.
-
Press the [MULTI] button or left-click once
again to go back to the split-screen.
4.3 Multi Display
-
To watch multiple channels simultaneously,
press the [MULTI] button or the
button from the Function menu and click
split mode.
- Each press of the [MULTI] button toggles between 4A, 4B, 4C, 4E, 9A, 9B, 10A and 16
channel split-screen modes. The SVR-960C/945 supports 4A, 4B, 4C, 4E, 9A and 9B,
SVR-480 supports 4A.
4.4 Auto Sequencing
To go into auto sequencing mode, set 1 to 16 in the auto sequencing setup or set the desired
channels and then press the [AUTO] button on the front or the
button from the Function