Filter
Top Products
Remove safety pin (
3
) and insert the 4 product
holders into the corresponding bracket holes (
1
).
Then place the product(
2
) so that it is firmly fixed
to the bracket. Make sure to re-insert and tighten
the safety pin (
3
) to securely hold the product to
the bracket.
A. Monitor
B. Wall Bracket
C. Wall
Wall Bracket Angle Adjustment
Adjust the bracket angle to -2°before installing it on the wall.
1. Fix the product to the wall bracket.
2. Hold the product at the top in the center and pull it forward
(direction of the arrow) to adjust the angle.
3. You can adjust the bracket angle between -2°and 15 °.
Make sure to use the top center, and not the
leftor the right side of the product to adjust the
angle.