Filter
Top Products
12
Getting Started
English
Installing the Stand
✎
Before assembling the product, place the product down on a flat and stable surface so that the screen is facing
downwards.
Insert the Stand Connector into the
Stand in the direction shown by the
figure.
Check if the Stand Connector is firmly
connected.
Turn the connecting screw at the
bottom of the stand fully so that it is
completely fixed.
Place a soft cloth over the table to
protect the product and place the
product onto the cloth so that the front
of the product is facing downwards.
Push the assembled stand into the
main body in the direction of the arrow
as shown in the figure.
Firmly fasten the stand using the
screws.
- Caution
If the height of "
B
A
" on one side is
different from the other side, unfasten
the screws, adjust the heights, and
re-assemble.
Avoid lifting the product holding only
the stand.
✎
The cleaning cloth is supplied with black high-glossy models only.
✎
The colour and the appearance may differ depending on the product, and the specifications are subject to change
without prior notice to improve the performance.
1
4
2
5
3
6