Filter
Top Products
OPERATION
30
Labeling the Channels
Use this feature to assign an easy-to-remember label to any channel (i.e., “CBS”,
“ESPN”, “PBS2”, CNN1”, etc.) A label consists of four fields, where each field is a letter,
a number, “*”, or a blank. When the INFO button is pressed, the channel label will
appear next to the channel number.
1
Press the CH or CH
button to tune to the
channel that will be
labeled.
2
Press the MENU button to
display the menu.
Press the ▲ or ▼ button
to select “Channel”, then
press the ENTER button.
3
Press the ▲ or ▼ button to
select “Name”.
Press the
ˆ
button to begin
labeling. The left-most field will
be highlight.
(Each label has four fields.
See top paragraph.)
4
Press the ▲ or ▼ button to
select a letter, a number, “*” or
a blank. (Pressing ▲ or ▼ but-
ton results in this sequence:
A, B,...Z, *, blank, 0, 1, ...9).
▼
Note: You cannot select “Name”
in the AV mode.
5
Press the
ˆ
button to switch to
the next field, which will be high-
light.
Select a second letter or digit
using the ▲ or ▼ button, as
above.
Repeat the process to select the
last two digits.
Press the EXIT button to exit the
menu.
Air 11
Move Enter Return
Channel
Auto program
ˆˆ
Add/Delete
ˆˆ
Fine tune : 00
Air/CATV : Air
Name : - - - -
Move Adjust Return
Channel
Auto program
ˆˆ
Add/Delete
ˆˆ
Fine tune : 00
Air/CATV : Air
Name : - - - -
Move Adjust Return
Channel
Auto program
ˆˆ
Add/Delete
ˆˆ
Fine tune : 00
Air/CATV : Air
Name
ˇˇ
P - - -
ˆˆ
Move Adjust Return
Channel
Auto program
ˆˆ
Add/Delete
ˆˆ
Fine tune : 00
Air/CATV : Air
Name
ˇˇ
P B S 1
ˆˆ