Filter
Top Products
OPERATION
English - 30
Memorizing the Channels
Your TV can memorize and store all of the available channels for both “off-air” (antenna) and
cable channels. After the available channels are memorized, use the CH and CH
buttons to scan through the channels. This eliminates the need to change channels by entering
the channel digits. There are three steps for memorizing channels: selecting a broadcast source,
memorizing the channels (automatic) and adding and deleting channels (manual).
Selecting the Video Signal Source
Before your television can begin memorizing the available channels, you must specify the
type of signal source that is connected to the TV (i.e., an antenna or a cable system).
3
Press the ▲ or ▼ button
to select “Auto Program”,
then press the ENTER
button.
1
Press the MENU button.
Press the ▲ or ▼ button
to select “Channel”, then
press the ENTER button.
2
Press the ENTER button
to select “Antenna”.
Press the ▲ or ▼ button
to select “Air” or “Cable”,
then press the ENTER
button.
Antenna : Air √
Auto Program √
Add / Delete √
Favorite Channels √
Name √
Fine Tune √
Signal Strength √
LNA : On √
T V Channel
Antenna : Air √
Auto Program √
Add / Delete √
Favorite Channels √
Name √
Fine Tune √
Signal Strength √
LNA : On √
T V Channel
Antenna : Air
Auto Program
Add / Delete
Favorite Channels
Name
Fine Tune
Signal Strength
LNA : On
Air
Cable
Channel
T V
continued...
AA68-03739C-00Eng 10/26/05 9:59 AM Page 30