Filter
Top Products
INSTALLATION
English - 12
Separate VHF and UHF Antennas
If you have two separate antennas for your TV (one VHF and one UHF), you must
combine the two antenna signals before connecting the antennas to the TV. This
procedure requires an optional combiner-adaptor (available at most electronics shops).
1
Connect both antenna leads
to the combiner.
2
Plug the combiner into the
“VHF/UHF” terminal on the
rear panel.
Antennas with 75-ohm Round Leads
1
Plug the antenna lead into
the “VHF/UHF” terminal on
the rear panel.
AA68-03780A-00Eng_US 4/27/06 3:57 PM Page 12