Filter
Top Products
INSTALLATION
English - 17
Connecting a Camcorder
The side panel jacks on your TV make it easy to connect a Camcorder to your TV. They
allow you to view the Camcorder tapes without using a VCR.
• Please be sure to match the color coded input terminals and cable jacks.
1
Locate the A/V output jacks on the Camcorder. They are usually
found on the side or rear of the Camcorder.
2
Connect a set of audio cables between the “AV IN 2 (L, R)” jacks
on the TV and the AUDIO OUT jacks on the Camcorder.
If you have mono Camcorder, connect L(mono) to Camcorder
audio out using only one audio cable.
3
Connect a video cable between the “AV IN 2 (VIDEO)” jack on
the TV and the VIDEO OUT jacks on the Camcorder.
The audio-video cables shown here are usually included with a
Camcorder. (If not, check your local electronics store.) If your
Camcorder is stereo, you need to connect a set of two cables.
Connecting to an Analog Amplifier
• Please be sure to match the color coded input terminals and cable jacks.
The “AV OUT (L, R)” jacks cannot be
used for external speakers. You must
hook them up to an amplifier.
When an audio amplifier is
connected to the “AV OUT (L, R)”
jacks: Decrease the gain (volume) of
the TV, and adjust the volume level
with the Amplifier's volume control.
2
3
AA68-03780A-00Eng_US 4/27/06 3:57 PM Page 17