Filter
Top Products
INSTALLATION
English - 13
Connecting Cable TV
To connect to a cable TV system, follow the instructions below.
Cable without a Cable Box
1
Plug the incoming cable into
the “VHF/UHF” terminal on
the rear panel.
Connecting to a Cable Box that Descrambles All Channels
1
Find the cable that is
connected to the ANTENNA
OUT terminal on your cable
box.
œ This terminal might be labelled
“ANT OUT”, “VHF OUT” or
simply, “OUT”.
2
Connect the other end of this
cable to the “VHF/UHF”
terminal on the rear panel.
AA68-03780A-00Eng_US 4/27/06 3:57 PM Page 13