Samsung UN48H5500 Flat Panel Television User Manual


 
182 183
The Schedule Recording/Timeshift function isn't
working.
This function is not available in the U.S.A. and Canada.
There is something wrong
with the TV.
Try this!
The TV cannot recognize the
USB device or the Format
Device, Check Device, or
Device Performance Test
has failed.
Refer to the USB device's manual and see if data can be stored on it.
Check if the USB device is in a locked state.
Check if the USB device was formatted when it was connected to a computer.
Formatting a USB device after connecting it to the TV may result in a
formatting failure. If Device Performance Test or Format Device has failed,
there may be a problem with the USB device or its specifications. Try using a
different USB device.
There is a message saying
I need to format the USB
storage device.
Check if the USB device is in a locked state.
Use the USB recovery function to recover the USB device.
Schedule Recording cannot
be used.
Check if there is a USB device connected to the TV.
Check if the channel is a digital channel that can be recorded. Recording will
automatically stop if the signal becomes too weak. The Timeshift function
will not work if there isn't enough storage space on the USB device.
I get a performance test
failure message and then
Schedule Recording and the
Timeshift operation stops
working.
This problem can occur when using a low-performance USB storage device
that does not support recording. A USB hard drive with a speed of 5,400rpm
or above is recommended. A USB memory Stick is not supported.