Filter
Top Products
Connections to other equipment
The exact arrangement you use to interconnect various video and audio components to the LCD TV is
dependent on the model and features of each component. Check the Owner's Manual provided with each
component for the location of video and audio inputs and outputs.
The connection diagrams below are offered as suggestions. You may need to modify them to accommodate
your particular assortment of components. The diagrams are intended to show component video and audio
interconnections only.
To connect the LCD TV to a VCR
Rear of the LCD TV
@@@.4.1,--
@@@cN.,=o-,
To AudioNideo OUT
Audio/Video cord G
(not supplied)
To VIDEO/AUDIO (L/R) IN
]
To connect the LCD TV to a VCR with an S-Video cord
If you connect aVCR with a S-Video cord to the S-VIDEO IN jack on the LCD TV, you must also connect the
audio cords to the VIDEO/AUDIO(L!R) IN jacks. The S-Video cord only carries the video signal. The audio signal
is separate.
Rear of the LCD TV To S-Video OUT
To S-VIDEO IN
I @ @1-'g I S-Video cord (not supplied) i/_
I_@qL?_ _ Audiocord(notsupplied) (_
To VIDEO/AUDIO (L!R) IN
To Audio OUT
NOTE:
• When the S-Video cord and the video cord are connected to each jack at the same time, the S-Video cord
takes precedence over the video cord.
To connect the LCD TV to a DVD player/Satellite receiver
If your DVD player or Satellite receiver has a S-Video out jack, connect cords as shown.
Rear of the LCD TV
÷@¢1
I @ @1-@
To VIDEO/AUDIO (L!R) IN
To S-VIDEO IN To S-Video OUT
S-Video cord (not supplied) r,,/.
Audio cord (not supplied)
To Audio OUT
%
I i i i i d
/
12