Sansui HDLCD1900A Flat Panel Television User Manual


 
Press or to select"Analog Caption" or"Digital
Caption".
When you select "Analog Caption", you can
choose Cl, C2, C3, C4, T1, T2, T3 and T4.
5
6
When you select "Digital Caption", you can
choose from CSl, CS2, CS3, CS4, CS5 and CS6.
Press or _,-to select the desired Closed
Caption mode for both Digital and Analog
Caption.
Press or to select "CC Priority", then press
or _ to select "Digital CC" or "Analog CC'.
7
NOTE:
Depending on the broadcast signal, some
Analog Captions will function with a Digital
broadcast signal. This step prevent that two
kind of captions are overlapping.
Press EXIT to return to the normal screen.
NOTE:
If the program or video you selected is not closed-
captioned, no captions will display on-screen.
If text is not available in your viewing area, a black
rectangle may appear on-screen. If this happens,
set the CC Setting to "Off".
When selecting Closed Captions, the captioning wilt
be delayed approx. 10 seconds.
If no caption signal is received, no captions will
appear, but the television will remain in the Caption
Mode.
Misspellings or unusual characters may
occasionally appear during Closed Captioning. This
is normal with Closed Captioning, especially with
live programs. This is because during live programs,
captions are also entered live. These transmissions
do not allow time for editing.
When Captions are being displayed, on-screen
displays, such as volume and mute may be seen
but may interfere with Closed Captions.
Some cable systems and copy protection systems
may interfere with the Closed Captioned signal.
If using an indoor antenna or ifTV reception is
very poor, the Closed Caption Decoder may not
appear or may appear with strange characters or
misspelled words. In this case, adjust the antenna
for better reception or use an outdoor antenna.
CC advanced
When you have selected Custom as the display
method, you can adjust the various setting listed
below as follows:
This feature is designed to customize Digital Captions
only.
Press MENU.The menu screen will appear.
Press or to select"Setup", then press _ or
ENTER.
or to Caption",
Press select "Closed then
press _ or ENTER.
The Closed Caption menu will appear.
Press or to select"Digital CC Preset", then
press or _ to select"Custom".
or to Advanced",
Press select "CC then
press _- or ENTER.
The CC Advanced menu will appear.
or to item,
Press select the desired then
press or _ to change the setting.
You can select from among the following items
and parameters.
Text Size: Auto, Small, Standard, Large
Text Type: Auto, Style1, Style2, Styte3, Styte4,
Style5, Style6, Style7
Text Edge: Auto, None, Raised, Depressed,
Uniform, Left Shadow, Right
Shadow
Text Color: Auto, Black, White, Red, Green,
Blue, Yellow, Magenta, Cyan
Text Opacity: Auto, Transparent, Translucent,
Solid, Flashing
Background Auto, Black, White, Red, Green,
Color: Blue, Yellow, Magenta, Cyan
Background Auto, Transparent, Translucent,
Opacity: Solid, Flashing
Press EXIT to return to the normal screen.
NOTE:
Do not set the Closed Caption "Text Color" and
"Background Color" as the same color or you will
not be able to see the text.
Do not set both the "Text Opacity" and the
"Background Opacity" to "Transparent" or you will
not be able to see the text.
Adjusting the picture
preference
You can select four picture modes--Sports,
Standard, Movie and Memory--as described in
the following table:
Press MENU.Then press or to select
"Picture", then press I_ or ENTER.
Press or to select"Picture Preference".
or _ to a you want to adjust.
Press select mode
2O