Filter
Top Products
ENGLISH
Step 5: Attach Low Prole Monitor Brackets to a television with a curved back or an obstruction near the threaded insert.
Determine the diameter of the Bolt (S,T,U,V) your television requires by hand threading them into the threaded insert on the back of the
television. If you encounter any resistance, stop immediately.
Once you have determined the correct diameter Bolt (S,T,U,V), see the appropriate diagram below, thread the Bolt through the appropriate
Lock Washer (W,X,Y,Z), corresponding Washer (CC,DD), Low Prole Monitor Bracket (F) or Monitor Bracket Extension (B), a second
Washer (CC, M4/M5 diameters only), a Spacer (AA,BB) and nally into the television.
Make sure the Low Prole Monitor Brackets (F) are vertically centered and level with each other.
Tighten the Bolts (S,T,U,V) securing the Low Prole Monitor Brackets (F) to the television.
Diagram 5
M4
Diameter Bolt
M6
Diameter Bolt
M8
Diameter Bolt
M5
Diameter Bolt
S
W
CC
CC
AA
F
T
X
CC
CC
AA
V
Z
DD
BB
U
Y
DD
BB
F
VMPL3_051106_ML.indd 9 7/17/06 11:37:11 AM