Sanyo CE32DFN2-B Flat Panel Television User Manual


 
13
Many of your TV’s functions are controlled through the menu function.
During the menu operation the following buttons are used.
u : To enter the menu function.
: To go back and to exit the menu function.
: To navigate up and down in the menus.
: To navigate forwards to the next screen or to
activate settings.
1. Press the MENU button to select main menu, select Picture using
ee
or
dd
buttons.
2. Press 1 to enter. Select and adjust to obtain the best picture
settings for your environment.
Text bright : Brightness of Teletext screen
MINIMUM / CENTRE / MAXIMUM.
Tint : Colour phase if NTSC equipment is detected.
Storing picture preferences
If you have altered any of the settings in the Picture menu you can
store them. You can be recall again later.
In the picture menu press
66
to select memory.
Press the 1 button, a tick appears in the box and the settings are
stored.
1. Press the MENU button to select main menu and using
55
or
66
select Sound.
2. Select and adjust to obtain the best sound settings for your
environment using
55
,
66
, 1 or 2.
3. Press MENU button repeatedly to exit.
Off-timer setting
The Off timer will switch the TV set into the standby mode when the
selected time has elapsed.
1. Press the MENU button to select main menu. Press
55
or
66
to
select Timer.
2. Press
1 to enter
OFF Timer.
3. Press
1 button, and highlight time setting column by pressing
the
55
or
66
buttons.
When the time setting column is selected its colour changes to yellow.
The time changes in 30 minute steps.The maximum time is 2:00hrs.
When you are ready to store your settings press the 1 button and
the setting column numbers colour changes to green. The tick
appears as shown above and its colour changes to yellow.
If you have set the off timer, then one minute before the TV switches,
a display appears on the screen.
4. Press the MENU button repeatedly to exit the menu.
If the TV set is switched off by the Mains Switch
4
,
or you enter
the preset mode, the timer settings will be cancelled.
Child lock
You can prevent small children from operating the TV with the front
buttons of the TV set.
1. Press the MENU button and select main menu.
2. Press
55
or
66
to select Setting, press
1 to enter
Child lock
/ AV2 menu.
3. Press
55
or
66
to select Child lock, press
1 to select ON or
OFF.
The child lock mode will be reset to “OFF” when the TV set is
switched off with the Mains ON/OFF 3 switch.
Setting of AV2 input mode
If you use a VCR which has S-VHS, you should connect it to AV2 and
change the AV2 menu to S-VIDEO.
1. Press
66
to select AV2, press 1 or 2 to select S-VIDEO /
VIDEO.
2. Press MENU button repeatedly to exit.
MENU OPERA
MENU OPERA
TION -
TION -
Anologue channels
Anologue channels
Picture menu
memory ?
Brightness
Contrast
Colour
Sharpness
memory
Sound menu
Timer menu
OFF-
Timer
00 30
OFF-
Timer
00 30
Not set
Set
Tuning
Swap
Fine Tuning
Brightness
Contrast
Colour
Sharpness
Text bright
memory?
Tint (only when NTSC is detected)
Picture
MENU
Sound
Timer
Volume
Bass
Treble
Balance
OFF Timer
Setting Child lock
AV2
ON/OFF
VIDEO/S-VIDEO
Preset
AUTO
CH:34
P:04
Skip OFF
Memory?
SEMI
CH:34
P:04
Skip: OFF
Memory?
Picture
Sound
Timer
Setting
Preset
Brightness
Contrast
Colour
Sharpness
Text bright
memory?
Sound
Timer
Setting
Preset
Picture
Volume
Bass
Treble
Balance
10
Setting menu
Picture
Sound
Timer
Setting
Preset
Child lock
ON
AV2
OFF
+
time setting column
Setting menu
Picture
Sound
Timer
Setting
Preset
AV2
VIDEO
Child lock
S-VIDEO