Filter
Top Products
18
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
➃
Recall Key—Select the first channel you
want to watch; then select another channel
using the NUMBER keys. Press RECALL to
switch between the channels.
NOTE: The RECALL key cannot toggle between a
Digital channel and an Analog channel.
See TUNER (#6) key description.
➄
Menu key—Press this key to display the on-
screen menu.
➅
Tuner Key—Use this key to toggle from one
tuning system to another, digital channels
and analog channels.
NOTE: The TUNER key is inactive when an
external input is selected (Video 1,
Video 2, Video 3, or HDMI).
➆
Caption Key—Press to select analog or
digital captioning. The Analog Caption
modes are: CC1 ~ CC4, Quikcap, and OFF.
The Digital Caption modes are: Digital
CC1 ~ CC6, Quikcap, and OFF.
➇
Channel Scanning
((
CH ▲▼ ) Keys—Press
▲ (up) ▼ (down) keys to tune to the next
higher or lower channel in the Channel Scan
Memory list. The scanning loop includes
analog channels, digital channels, and all AV
inputs.
➈
Pix Shape Key—Use this key to change the
video display format. Available options
depend on signal received and the broad-
cast’s aspect ratio. They may include:
PIX1
,
PIX2
,
PIX3
, and
PIX4
. See simulated DTV
images below.
➉
Audio Key—Press to select the desired
audio mode (if available): DIGITAL: Main,
Sub1, Sub2, Sub3, etc.; ANALOG: Stereo,
Mono, SAP.
Power Key—Press to turn DTV on or off.
REMOTE CONTROL KEYS (CONTINUED)
11
PIX1
Gray colored borders
appear at the sides, of
the screen.
Note: 4:3 image without
distortion on a 16:9
screen.
PIX3
Enlarges a Pix2 image
vertically (some of the
image may be cropped
off).
PIX4
Stretches the Pix3
image horizontally (por-
tions of the sides
and/or top and bottom
may be cropped off).
PIX2
A 16:9 image fills the
screen normally. A 4:3
images is stretched hor-
izontally and may ap-
pear distorted.