Sanyo DP32746 Flat Panel Television User Manual


 
POSITIONING THE LCD DTV
Always use an appropriate table or stand when
positioning your DTV. For best viewing, avoid
locating the DTV where direct sunlight or
indoor lighting will fall on the screen. Do not
position the DTV in a confined area. Allow
adequate space for proper ventilation.
5
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
GETTING STARTED
DETACHING THE DTV STAND
(OPTIONAL)
Tools Needed: Phillips screwdriver
Important Note: Place DTV face down on a
padded or cushioned surface to protect the
screen and finish.
1
Remove four (4) screws from the metal
bracket.
CAUTION: Hold the stand firmly as you
remove the last screw.
2
Carefully remove the DTV stand.
Model DP26746
Model DP32746
NOTE: All dimensions are in millimeters (mm).
WALL MOUNTING (OPTIONAL)
This LCD DTV is designed
so that it may be mounted
on a wall, if desired. Use
the threaded inserts on the
back of your DTV to secure
it using a wall mounting kit.
NOTE: Wall Mounting kit is
not supplied, check
with your local elec-
tronics store.
LCD Mounting screws measurements:
DP26746—M4 Diameter, Length—10mm
(minimum) to 20mm (maximum).
DP32746—M6 Diameter, Length—10mm
(minimum) to 20mm (maximum).
DTV Back View
PROTECTING THE LCD SCREEN
The screen is likely to be damaged if it is not
maintained properly. DO NOT use hard objects
such as hard cloth or paper. DO NOT use exces-
sive pressure when cleaning the LCD screen;
excessive pressure can cause permanent
discoloration or dark spots.