Sanyo DP50747 Flat Panel Television User Manual


 
11
HDTV BACK PANEL
(CONTINUED ON NEXT PAGE.)
Analog / Digital Antenna Input—Connect
an RF antenna or Analog Cable system to this
jack.
See PAGE 15 for Signal connections.
Analog Audio Out (L/R) Jacks—Connect
external audio equipment here.
See PAGE
27 for Audio Out jack connections.
HDMI INPUT1/2/3 (High-Definition
Multi-media Interface), PAGE 7—
Connect digital video equipment to this
jack. It takes only one cable (not sup-
plied) to communicate between
audio/video equipment and this DTV.
HDMI (DVI) INPUT1 jack is compatible
with DVI equipped AV devices. (Sepa-
rate audio connection and an adapter
are required for DVI device.)
See
PAGES 18 and 19 for HDMI connec-
tion.
Digital Audio Output—Use a Phono-Type
Coaxial Digital Audio Out Cable to connect
Digital Audio Output to an advanced stereo
home theater system equipped with Dolby
®
Digital 5.1.
See PAGE 26 for Digital Audio
Out jack connection.
Audio/Video Input (VIDEO1)—Connect
analog video equipment here.
See PAGES 23,
24, and 25 for AV VIDEO1 jack connection.
Note: S-Video connection overrides the (Video1) com-
posite video connection.