Sanyo DP50747 Flat Panel Television User Manual


 
37
MENU OPTION—
CHANNEL SCAN MEMORY
Cannot select or scan some
channels.
Channels may be removed from
memory.
Check antenna connections.
NO digital signal being broadcast.
Weak Signal.
V-Guide is set to block
programming.
Select Channel Scan memory and
manually add channels or start an
“All Channel Search.”
Turn antenna, install signal
booster.
Set V-Guide to “Off” or press
RESET key to clear all settings and
restart channel search.
HELPFUL HINTS (PROBLEMS/SOLUTIONS)
SYMPTOM CHECK THESE CONDITIONS TRY THESE SOLUTIONS
If you continue to experience problems, please call toll free
1-800-877-5032. We can Help!
3
Use the CHANNEL (CH ▲▼) keys or numerical
0 ~ 9 keys to select desired channel.
4
Press the ENTER key to delete the channel. The
display will change to “deleted.”
1
Press the MENU key to display the Main menu.
2
Use the CURSOR ▲▼ keys to highlight Channel
Scan Memory. Press ENTER.
DELETING ANALOG OR DIGITAL
CHANNELS FROM MEMORY
Channel Scan Memory is a list of active channels that
you can scan through using the Channel Scan CH (up)
CH (down) keys. This list can be customized by delet-
ing and/or adding channels.
After 3 seconds the TV screen will display
“Add?”
OPERATING TIPS:
When a digital channel is deleted, all of that
channel’s sub-channels are deleted as well.
Only previously deleted digital channels can be
added back to the Channel Scan Memory.