Sanyo DP50747 Flat Panel Television User Manual


 
19
HDMI TO
DVI
CABLE
(CABLES NOT SUPPLIED.)
DVI TO HDMI INPUT1 CONNECTIONS (INCLUDES HDCP COPY
PROTECTION)—
Receiving the ultimate picture
HDMI INPUT1 CONNECTION:
Connection Option 2
1
Connect the Set-top Box (STB) DVI Output to the
DTV’s HDMI INPUT1.
2
Connect the STB Audio out to the DTV’s
VIDEO3 Audio In L /R.
3
Press INPUT to select HDMI 1 to view the digital
program.
IMPORTANT FACT:
Only the HDMI INPUT1 jack can
accept a DVI (digital video interface) signal.
Note:Check with your local electronics store for a DVI to
HDMI Adapter Cable that matches your equipment
and the DTV.
SET-TOP BOX (or similar device)
REMOTE CONTROL
INPUT
OPERATING TIPS:
Use HDMI (DVI) INPUT1 to connect your
DVI device, make sure you connect Audio
out to the DTV’s VIDEO 3 Audio In.
The VIDEO 3 audio jacks are used to
receive the audio from the DVI device.
These video jacks cannot be used when a
DVI device is connected.
Refer to the owner’s manuals and user’s
guides that came with your external equip-
ment for connection options.
HELPFUL HINTS (PROBLEMS/SOLUTIONS)
SYMPTOM CHECK THESE CONDITIONS TRY THESE SOLUTIONS
“No Signal” will appear randomly
on the screen when no signal is
detected at the HDMI jack.
Check Audio/Video connections.
Check external equipment
connections.
Check external equipment setting.
Press the INPUT key.
Switch on external equipment.
Set external equipment output
connections to match input
connections.
If you continue to experience problems, please call toll free
1-800-877-5032. We can Help!
DTV HDMI INPUT1
AUDIO
CABLE