Filter
Top Products
The V-Guide system contain both age-based and content-based settings. This gives parents
discretionary ways of choosing appropriate material for their children to view.
Content ratings are represented by the initials D (Suggestive Dialog), L (Adult Language),
S (Sexual Situations), V (Violence), and FV (Fantasy Violence). When programming contains
any or all of these conditions, these letters become part of the icon that is displayed on the TV
screen.
A rating icon will generally appear in the upper left hand corner of the TV screen for
about fifteen seconds.
V-Guide (Parental Control) Information
NOTE: THIS FEATURE IS DESIGNED TO COMPLY WITH THE UNITED STATES OF
AMERICA’S FCC V-CHIP REGULATIONS. THEREFORE, IT MAY NOT
FUNCTION WITH BROADCASTS THAT ORIGINATE IN OTHER COUNTRIES.
This Sanyo television is equipped with an electronic V-Chip to interpret MPAA and TV Parental
Guidelines rating codes. When these codes are detected, the TV will automatically display or block
the program, depending upon choices you make when setting up the V-Guide system.
QuickTips
■
Use the CHANNEL
▲ / ▼ keys
and the VOLUME
– /+ keys to
navigate through
the menus and to
make selections
from the menus.
■
V-Guide feature is
accessible only from
the remote control.
■
The TV guidelines
rating icon will
appear generally in
the upper left hand
corner of your TV
screen.
■
The V-Guide display
remains on screen
for approximately
20 seconds. If it
disappears, press
the
V-GUIDE key.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
V-Guide Operation
Use this feature to supervise television viewing for young children. This television can be set to
automatically block programs with content you deem as inappropriate for your children to view,
including: suggestive dialog, adult language, sexual situations, violence, and fantasy violence.
The ability of the television to block the reception of specific programming content depends
upon several conditions: 1) The program must be rated, 2) Networks must broadcast the rating
code data, 3) Cable companies must transmit the rating code signal, and 4) The TV must be
properly setup to decode the signal.
Setting MPAA Movie Rating
1. Press the V-GUIDE key on the remote control to display menu.
2. Press the + key to switch V-Guide ON.
3. Press the + key again. Then use the ▲ / ▼ keys to highlight
rating.
4. Press the MENU key to Block (B) or Unblock (U) selected
rating. (➡ Arrow indicates selection.)
5. Press the – key to return to the V-Guide Options menu.
(Continued on page 16.)
V-GUIDE
MPAA Movie Ratings
TV Parental Guidelines
Press MENU key to BLOCK
Use ▲▼, – + keys to select
Press V-GUIDE key to exit
X B
NC17 B
➡
R
B
PG13 U
PG U
G U
V-Guide
15