Filter
Top Products
Connecting a DVD Player or other equipment
Switch off TV and external equipment before connecting cables. (Cables are not supplied.)
❶
Connect a DVD Player or other equipment’s interlaced Component Video Output to the
TV Component Video Input (Y-Pb-Pr) Jacks.
❷ Connect the DVD Player’s Audio Output to the TV Component L/R Jacks.
❸
Press POWER to turn on the TV. Turn on external equipment also.
❹ Press the INPUT key to select COMPONENT3.
Note: DVD Player component output must
be set to Interlaced (480i).
Y
P
B PR
RL
AUDIOVIDEO
COMPONENT VIDEO OUT
S-VIDEO OUT
A/V OUT
S-VIDEO
VIDEO AUDIO INPUT
Y
P
b
Pr
AV2 AV1
COMPONENT
RR
R R
L L L
L
(MONO)
(MONO)
UHF/VHF/CATV
75Ω
AUDIO
OUTPUT
VIDEO
AUDIOAUDIO
DVD Player
❶
TV Back
INPUT
POWER
RESET
DVD SAT AUX
VCR TV
CABLE
❸
Remote Control
What you will need for connections
:
❶
Component video cable – 1
❷ Audio Cable – 1
What you will need for connections:
❶
Audio Cable – 1
Using the Component Audio/Video Input Jacks
QuickTips
■
You may be able
to use the TV remote
control to operate
your DVD Player.
(See pages 9 ~11).
■
A solid Blue screen
with COMPONENT3
displayed means
that the Compo-
nent Video mode
is selected, but
no signal is being
detected at the Com-
ponent jacks. Check
connection, and
turn on external
equipment.
■
Position your TV
at least 2 feet from
stereo speakers.
The magnets in the
speakers may affect
the picture quality.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
❶
❹
Press INPUT key after
connecting cables to access the
A/V inputs.
There is NO need to tune to a
blank
channel.
❷
❷
S-VIDEO
VIDEO AUDIO INPUT
Y
P
b
P
r
AV2 AV1
COMPONENT
RRR R
L L L L
(MONO)
(MONO)
AUDIO
OUTPUT
VIDEO
AUDIO
AUDIO
Back of TV
Stereo Amplifier
Using the Audio Output Jacks
Connecting Audio Output Jacks to a Stereo Amplifier
Switch off TV and external equipment before connecting cables.
(Cables are not supplied.)
❶
Connect the TV Audio Output (R/L) to the Stereo Amplifier In (R/L).
❷ Press POWER to turn on the TV. Turn on external equipment also.
❸
Use the AUDIO OUTPUT on-screen menu options to select Fixed or Variable output signal.
Notes: DO NOT connect external speakers directly to the TV.
When TV Speakers is in the ON mode, sound will
be produced through your TV and stereo amplifier.
When TV Speakers is in the OFF mode, sound will be
produced only through the stereo amplifier.
(See page 14 to set TV speakers.)
❶
6
Component A/V Input / Audio Output Jacks