Filter
Top Products
Pre-operation preparation
9
If the television system of the camera to be connected and
the type of monitor differ, live videos cannot be monitored on
the normal screen. Check the specifications of the equipment
to be connected and set the system changeover switch on the
rear panel.
• Do not forget to turn off the power when adjusting the
settings.
b Matching the television system of the camera
(PAL)
Up: When using a NTSC camera
Down: When using a PAL camera
b Selecting the type of monitor (VGA)
Up: When connecting the general monitor to the video
output terminal
Down: When connecting a PC monitor to the VGA
terminal
1
Press the MENU button.
The PASSWORD input screen is displayed.
• To return to the previous screen, press the EXIT/
STOP button.
2
Enter the "ADMIN PASSWORD" using the channel
selection buttons.
The MAIN MENU screen is displayed.
•"1111" is the factory default setting password.
2 3
1
9
A
Setting the television system and the monitor
output
Cannot be used when PAL and NTSC system are mixed.
The VGA terminal and the video output terminal cannot
be used simultaneously.
POWERMODEAUTOMENU
Generic monitors PC monitors
B
Setting the clock (CLOCK SET)
PASSWORD
- - - -
CH1
2009/05/03 09:04:54
2%
:A
RECORDLIVE SYSTEM
HDD SETNETWORK SERVICE
MAIN MENU
CH1
PASSWORD
* * * *
- - - -
2009/05/03 09:04:54
2%
:A
1 10
~
L8HBT_WA(DSR-2116_2108)(GB).book 9 ページ ２００９年５月２７日 水曜日 午後４時５０分