Sanyo DSR-3009 DVD Recorder User Manual


 
English
23
Recording Images
Alarm recording
Alarm images are recorded automatically in the alarm recording area when
the alarm input terminals or motion sensor have detected an alarm.
When alarm recording is in operation, normal recording, timer recording
and pre-alarm recording are automatically suspended, and they are
resumed when the alarm recording is finished.
You can set the computer to play back a sound file that is stored in a
specified folder on the computer's hard disk while alarm recording is in
progress, to give the computer its own original warning sound to be played
in the event of an alarm.
1.Create the warning sound (WAV file).
2.Rename the file and save it as follows.
"C:\BUZZER\BUZZER.WAV"
To stop the warning sound from playing while an alarm is being recorded,
click the P button on the operating panel.
1
The conditions for alarm recording are set beforehand using ALARM
REC MODE SET menu screen. (See p. 15)
2
Alarm recording begins automatically when an alarm is detected,
regardless of the operating or working conditions of the digital video
recorder.
3
Alarm recording stops automatically after the amount of time specified
by the DURATION setting has elapsed.
Pre-alarm recording
When pre-alarm recording has been set beforehand, the same images will
be recorded normally in the normal recording area and also in the alarm
recording area. The normal recording images will be recorded in this way
for the length of time specified by the DURATION setting, so that the
images recorded before the alarm occurred can also be seen when the
alarm recording is played back.
1
Set the pre-alarm recording conditions using the [PRE-ALARM
RECORDING] menu in the ALARM REC MODE SET menu screen. (See
p. 17)
2
The most recent images will be recorded automatically for the
specified duration, and they will be updated by being overwritten.
3
When an alarm recording is being carried out, pre-alarm recording is
automatically suspended, and it is resumed when the alarm recording
is finished.
L8HBA_US(DSR-3016 NETWORK)(GB only).book 23 ページ 2003年3月28日 金曜日 午後6時44分