16
BASIC OPERATIONS
SYSTEM SETTING (NOT ON ALL MODELS)
V-MODE (WHEN SELECTING INTERLACE, PROGRESSIVE OR S-VIDEO)
• When you press the [SYSTEM] button, the TV screen shows
the information as : “If you want to change, press
[SYSTEM] again.” Press the [SYSTEM] button again, the
video out system changes as follows.
According to the system of the TV to be connected, set the system of the unit to
make it match the TV.
Press SYSTEM button on the remote control, then choose TV TYPE.
SYSTEM
V-MODE
• When connecting to your TV's component video inputs, press the
V-MODE on the remote control to select INTERLACE,
PROGRESSIVE or S-VIDEO.
When you press the [V-MODE] button, the TV screen shows the
information as : “If you want to change, press [V-MODE]
again.” Press the [V-MODE] button again to change the video
mode.
DISPLAY
Each time you press the “DISPLAY” button when playing a disc, the TV screen shows
the information as :
TITLE ELAPSED
➝ TITLE REMAIN ➝ CHAPTER ELAPSED ➝
CHAPTER REMAIN ➝ DISPLAY OFF
DISPLAY
SINGLE ELAPSED ➝ SINGLE REMAIN ➝ DISPLAY OFF
Folder / Filelist
DVD
VCD
MP3 / CD
PAL
AUTO
NTSC
If you connect to Composite (basic A/V) inputs after selecting one of the 3
above option, picture is not displayed. Press the V-MODE on the remote
control to select Composite video.
1005DVD-DX501 2005.10.5 5:37 PM ˘`16