Sanyo DVD-DX501 DVD Player User Manual


 
34
FUNCTION SETTING
AUDIO
DUAL MONO
This is the output mode of the L and R signals of the set audio output. If it is set to
"MIX MONO", the function only works when the DVD being played is 2.0-channel.
STEREO
Choose this option, the audio output should be dummy stereo signal.
L-MONO
R-MONO
MIX-MONO
DYNAMIC RANGE
Set "Off" to view a program in the dynamic range as
recorded in disc. To hear loud sound softer and soft
sound louder, set "Full".
– FULL
––
– 3/4
––
– 1/2
––
– 1/4
––
– OFF
Digital Out
OFF
No signal is output from the coaxial, optical port.
Bitstream
Select this when the DVD player is connected with a power amplifier through
optical or coaxial port. Please refer to the page 14. when a Dolby Digital DVD,
DTS DVD or MPEG DVD is played, select this, the coaxial or optical port will
output in the corresponding digital format (source code). The power amplifier
to be connected must have Dolby Digital, DTS and MPEG DVD is played, the
optical or coaxial port will output in PCM 2-channel format.
LPCM
Select this when the DVD player is connected with a TV or a power amplifier
through audio cord.
Down Mix
Select Down Mix mode to LT/RT or Stereo
1005DVD-DX501 2005.10.5 5:37 PM ˘`34