Sanyo DVD-SX25 DVD Player User Manual


 
- 15 -
CONNECTION OF YOUR DVD PLAYER WITH TV
Be sure to turn off the power of each component before making the connections.
Scart socket:
Connecting your DVD player to TV via scart socket with a scart cable gives you the best picture performance.
If your DVD player will not be connected to a hi-fi set or A/V amplifier to hear better sound, scart is enough
for both audio & video connections.
VIDEO & AUDIO OUTPUT SOCKETS
Video (yellow) & Audio (Red: right, White: left) output sockets can be used to connect the DVD player to
your TV set via cables. To make this connection, your TV set must have Video & audio input connectors.
This type of connection is alternative to scart connection. Picture quality is not as good as Scart connection
but audio performance is the same.
Putting into operation:
After making the necessary connections stated above, plug the power cord to the mains socket. Unit will
be in standby mode. Press standby to turn on the unit. Open the disc tray with open/close button and insert
a playable disc (DVD/VCD/CD). Press open/close button again to close the disc tray and to start operating
the player. Player will start playing the disc automatically.