- 31 -
LANGUAGE SETUP
OSD LANG: You can select the default OSD
language of the player menus.
AUDIO: You can select the default audio language
if supported by that DVD disc.
DISC MENU: You can select the DVDs disc menu
language among these languages. Disc menu
appears in the selected language, if supported by
that DVD disc.
SUBTITLE:
You can select the default subtitle language if
supported by that DVD disc.
PREFERENCES
ANGLE MARK: This option allows you to turn on/off
the angle mark on the screen, which is displayed to
indicate that a multi angle scene has started. It also
shows which angle you are currently watching.
STANDBY TIME: Standby activation time can be
adjusted or standby can be disabled using this
option. If one of the time options is selected,
standby is activated, whenever no key is pressed
for the selected time duration in stop mode.
DEFAULT: If you choose RESET and press
SELECT, the factory-presets are loaded. After
factory reset, password and parental level does not
change.
DOWNMIX: This mode allows the DVD player
analog audio outputs to be matched to the features
available on the TV in use. Analog audio outputs can
be selected as:
SURROUND: Surround sound output.
STEREO: Two channels stereo. Use this option if
you have a stereo TV or a stereo HI-FI system.
NOTE: It is not possible to connect speakers
directly to this DVD player; an AV amplifier must
be used.
PARENTAL (Parental Level):
Playing some DVDs can be limited depending on the
age of users. The Parental Control function allows
playback limitation level to be set by the parent.
Parental Level can be adjusted to one of the eight
levels. Level 8 ADULT adjustment let you watch
all of the DVD titles ignoring the DVD discs parental
level. You can watch the DVD discs, which has the
same or lower parental level than the players level
only.
PASSWORD (Change Password):
Using this item you can change the current
password.
To change the password you will be prompted to
enter your old password. After you have entered
your old password, you can now enter the new 4-
digit password, two times
You can use C key to delete the incorrect entry.
Note: Factory preset of the password is
0000.You have to enter XXXX digital password
every time you want to change the parental level.
If you forget your password please contact
technical service.