Filter
Top Products
8. Specifications
118
t Operation Using HTTP Browser
Overview
The use of HTTP server functions will allow control of the projector from a web browser without the installation of special
software. Please be sure to use “Microsoft Internet Explorer 4.x” or a higher version for the web browser. (This device uses
“JavaScript” and “Cookies” and the browser should be set to accept these functions. The setting method will vary depend-
ing on the version of browser. Please refer to the help files and the other information provided in your software).
Access is gained to the HTTP server functions by specifying the following address in the entry column of the URL:
http:// <the projector’s IP address> /index.html
http:// <the projector's IP address> /lanconf.html
Note:
The display or button responses can be slowed down or operation may not be accepted depending the set-
tings of your network. Should this happen, consult your network administrator. The projector may not
respond if its buttons are repeatedly pressed in rapid intervals. Should this happen, wait a moment and re-
peat. If you still can’t get any response, turn off and back on the projector.
Preparation Before Use
Make network connections, set up the projector and confirm that it is complete before engaging in browser operations
(see Network setting on page 80 for more information).
Operation with a browser that uses a proxy server may not be possible depending on the type of proxy server and the set-
ting method. Although the type of proxy server will be a factor, it is possible that items that have actually been set will not
be displayed depending on the effectiveness of the cache, and the contents set from the browser may not be reflected in
operation. It is recommended that a proxy server not be used unless it is unavoidable.
Handling of the Address for Operation by Using a Browser
Regarding the actual address that is entered for the address or entered to the URL column when operation of the projector
is via a browser, the host name can be used as it is when the host name corresponding to the IP address of the projector
has been registered to the domain name server by a network administrator, or the host name corresponding to the IP ad-
dress of the projector has been set in the “HOSTS” file of the computer being used.
Example 1:
When the IP address of the projector is 192.168.73.1, access is gained to the HTTP server functions by specifying
http://192.168.73.1/index.html for the address or the entry column of the URL.