Sanyo PDG-DXT10KL Projection Television User Manual


 
5. Using On-Screen Display
72
Keystone
The keystone trapezoid can be adjusted by selecting this option.
Select Horizontal or Vertical using Ÿorź then, use ŻorŹ to adjust the projected image appearance as required.
IMPORTANT:
When adjusting the keystone, place the projector in the following position.
x Horizontal: set to the lens center
x Vertical: set to the maximum top
Lamp control
Select Normal or Eco from the lamp mode window. The lamp life can be extended by using the Eco mode and the fan
noise can be reduced.
Lamp mode
Select the lamps to be used for projection.
Select from the following:
Dual – Uses both lamps simultaneously.
Lamp1 – Uses Lamp1 only.
Lamp2 – Uses Lamp2 only.