Filter
Top Products
- 12 -
www.SCEPTRE.com
SCEPTRE X320 HDTV User Manual
Rear View Connection
Rear View ConnectionRear View Connection
Rear View Connections
ss
s
The following descriptions are for connections from left to right.
1. AV 2 – AV 2 connects to devices that use composite video cables such as VCR or DVD
player or Wii™. Connect the yellow for video and the red / white for audio.
2. VGA - This connection port connects to a PC for video using VGA cable. Be sure to
connect your audio cable to the VGA Stereo input if you want sound out of VGA video
source.
3. VGA STEREO INPUT - This connection port is for people who want to provide audio to
the TV when using a PC or a DVI video device. The sources use 3.5mm mini-jack audio
cable.
4. TV – This connection is for digital or analog cable without the cable box or over-the-
airwave antennas. The tuner is a hybrid tuner that tunes to both analog and digital
channels. This connection uses coaxial RF cable. For over-the airwave digital stations
please check
http://www.antennaweb.org.
5. YPbPr 1 – This connection port is for DVD players or satellite / cable set-top boxes that
use component cables. From left to right, connect green, blue, and red for video, and
then connect white for left channel audio, and red for right channel audio.
6. YPbPr 2 – This connection port is for DVD players or satellite / cable set-top boxes that
use component cables. From left to right, connect green, blue, and red for video, and
then connect white for left channel audio, and red for right channel audio.
7. SPDIF OUT - This connection port is used for sending out digital audio signals to digital
surround sound receivers. The black (OPTICAL SPDIF OUT) connector cover needs to
be pulled out and the port sends out either bit-stream or PCM digital sound signal to a
home theater receiver with digital input.
8. HDMI 3 – HDMI 3 connects to devices that use HDMI cable, such as Blu-ray or HD DVD
player, or HD cable / satellite set-top box. This connection port receives pure digital
audio and high definition signal through one single cable. This port also can accept a
HDCP video device for video.
9. HDMI 2 – HDMI 2 connects to devices that use HDMI cable, such as Blu-ray or HD DVD
player, or HD cable / satellite set-top box. This connection port receives pure digital
audio and high definition signal through one single cable. This port also can accept a
HDCP video device for video.
Please Note:
• This TV features a power saving function which will turn off the TV automatically
after 5 minutes of idling on a connection with no signal. This feature is present on
all connection.