Filter
Top Products
- 20 -
www.SCEPTRE.com
SCEPTRE X320 HDTV User Manual
Connecting a
Connecting a Connecting a
Connecting a Digital Audio Receiver
Digital Audio ReceiverDigital Audio Receiver
Digital Audio Receiver with
with with
with Optical
OpticalOptical
Optical SPDIF…
SPDIF… SPDIF…
SPDIF…
1. Make sure the power of X320 LCD HDTV and your receiver is turned off.
2. Obtain an optical SPDIF cable, connect it to your receiver’s optical
SPDIF digital input and the optical SPDIF connection on the LINE OUT
port on the back of the X320 LCD HDTV.
3. Turn on the X320 LCD HDTV and your receiver.
Please Note :
• If you want pure digital stream for your receiver to decode, you
must also configure the TV’s OSD Sound->Digital Audio Out
function. Make sure the option is on 5.1CH.
• If your receiver is making static noises when receiving 5.1CH,
you must use the PCM option instead.
• Please reference the receiver’s manual as well, to make sure
the receiver is configured to receive signals correctly from the
TV.
• The TV’s SPDIF out for 5.1CH is ONLY used for
antenna/cable connection. Any other incoming audio
signal will be passed out of SPDIF in PCM format.