Sears 24L4200U Flat Panel Television User Manual


 
101
Using the TV’s features
Using the Media Player
Gently insert the USB device into the port and do not remove
while viewing Media Player.
USB device: USB Mass Storage Class device (MSC)
Connectivity is not guaranteed for all devices.
Connect the USB device to the TV directly.
Do not use a USB Hub.
You must obtain any required permission from copyright owners
to use copyright content. Toshiba cannot and does not grant
such permission.
Depending on the file size and amount in your USB storage
device, it may take some time to load before content is viewable.
A message will display on-screen when files are loading from
the USB storage device.
Only limited types of U3 USB device are supported. Therefore, it
is suggested that you not use U3 USB with Media Player.
Non-supported characters will be replaced with a square.
Auto Start function
When Auto Start is enabled, you will be asked if you want to start
the Media Player when a USB device is inserted. If Auto Start is
disabled, you must manually start the Media Player from the menu.
To change the Auto Start setting:
1 Press the MENU button and open the Setup menu.
2 Press the ( arrow) button to select Media Player, and then
press the ENTER button.
3 Press the ( / arrow) buttons to highlight Auto Start.
4 Press the ( / arrow) buttons to select On or Off.
To open the Media Player
There are two methods for starting the Media Player: auto start and
manual start.
Auto Start:
1 Gently insert a supported USB storage device to the USB port
on the back of the TV. A prompt will appear.
NOTE