Sears 24L4200U Flat Panel Television User Manual


 
33
Connecting Your TV
Connecting a digital audio system
Connecting a digital audio system
The TV’s DIGITAL AUDIO OUT terminal outputs a Dolby
®
Digital or 2-channel down-mixed PCM (pulse-code modulation)
signal for use with an external Dolby Digital decoder or other
external audio system with optical audio input.
You will need an Optical audio cable (Use an optical audio cable
that has the larger “TosLink” connector and not the smaller
“mini-optical” connector.)
(Sample Illustration) L5200U Series—Connecting a digital audio
system
To control the audio:
1 Turn on the TV and the digital audio device.
2 Press the MENU button on the remote control and open the
Sound menu.
3 Press the ( / arrow) buttons to highlight Audio Setup, and
then press the ENTER button.
(Sample Image) Sound menu - Audio Setup selection
Dolby Digital decoder or
TV back panel
other digital audio system