Sears 24L4200U Flat Panel Television User Manual


 
6
5.375 x 8.375 ver 2.3
Removing the Pedestal Stand
1)
Carefully lay the front of the unit face down on a
flat, cushioned surface such as a quilt or blanket.
Leave the stand protruding over the edge of the
surface.
Note: Extreme care should always be used when
removing the pedestal stand to avoid damage to
the LCD panel.
2)
Remove the screws shown in the below diagram.
This will allow removal of the pedestal stand.
3)
Once you have removed the screws holding the
pedestal stand in place, remove the pedestal stand
from the TV.
19”/24” TV
32” TV
40”/46”/50” TV
CAUTION: Always place the TV on the floor or a
sturdy, level, stable surface that can support the
weight of the unit. To secure the TV, use a sturdy strap
from the hook(s) on the rear of the TV to a wall stud,
pillar, or other immovable structure. Make sure the
strap is tight, secure, and parallel to the floor.
Four screws
VESA Mounting Pattern
Four screws
VESA Mounting Pattern
Hook Sturdy strap
(as short as possible)
Hook
Sturdy strap
(as short as possible)
Four screws
VESA Mounting Pattern
Four screws