Filter
Top Products
Making Detailed Adjustments 37
■ HDMI Video Range
Note: This setting can be used only when HDMI 1 or HDMI 2 is selected as the image source
(see page 23). This setting cannot be used when the Color Mode is set to x.v.Color (see
page 28).
If your video equipment has an HDMI port and you’ve connected it to the projector
using an HDMI cable, set the level of the projector to match that of the video equipment.
■ Power Consumption
This setting controls the light output from the projector. On Normal, the projector
produces a brighter image and the lamp uses more power. To save power and extend the
life of the lamp, select
ECO.
Sharpness and Picture Quality Settings
If the image looks fuzzy, or if it contains noise or flickering, you can use these settings to
correct it.
■ Sharpness
Use this function to make lines and edges appear more distinct in the image. This setting
is stored separately for each image source and color mode setting. You can select
Standard to adjust the sharpness of the entire image, or select Advanced to access the
following submenu:
Note: The Advanced setting cannot be used with a signal input through the PC port.
Choose Thin-Line Enhancement to sharpen details such as hair and clothing. Choose
Thick-Line Enhancement to sharpen large contours and backgrounds. Choose Vert.
Line Enhancement
to increase vertical image sharpness. Choose Horiz. Line
Enhancement
to increase horizontal image sharpness.
You can also access this setting by pressing the
Sharpness button on the remote control.
Signal > Advanced > HDMI Video Range
Image > Power Consumption
Image > Sharpness